Metcalfe WD50H Waste Disposal

Metcalfe WD50H Waste Disposal

£930.00 Including VAT

Availability: In stock SKU: NCE-WD50H Category:

Description

Metcalfe WD50H Waste Disposal

Product features

  • The nominal capacity is up to
    150kg per hour
  • Hopper unit for welding or screwing into tabling 20kgs

This unit is designed for welding or screwing into a
stainless steel worktop or tabling, through an aperture of
277mm x 277mm. Other sizes available to special order
and quotation. Supplied complete with wall mounted
motor control box incorporating 12 volt printed circuit.
Unit incorporates lockable hopper lid which is fully
electrically interlocked to prevent hand access to the
grinding head whilst the machine is running. Hopper
and lid manufactured entirely from stainless steel.

INSTALLATION
ELECTRICAL Connection to be made from a fused isolator. All units supplied with 2 metres mains cable
wired into the control box.
Model WD-50H- 15mm cold water supply should be connected to the 1/2”BSP
connection on the solenoid valve which provides automatic water flow each time the machine is
started. Minimum water head 5 metres. For best results flow rate should be approximately
12-16 litre per minute.
WASTE 54mm plastic or copper pipe to be connected to ‘S’ trap supplied with units, laid to a minimum
CONNECTION fall of 1 in 16. The pipework should be as simple as possible with no sharp bends.

Additional information

Power

Single Phase

Reviews

There are no reviews yet.


Be the first to review “Metcalfe WD50H Waste Disposal”